Global Event Partners · Africa
Event floor plan builder
A whole site at true scale. Zoom and pan freely — the grid stays in real metres at every level. Spaces and stands are drawn from the same measurements, so what fits on screen fits on the floor.
Client page
Once the plan has an event name, the page opens on the client view: the plan, these two lines, and nothing to press but the zoom and the pictures. Press See the client view, top right, to check it.
Load a site
Swakopmund loads every measured space: the hall and its two halves, the pre-function foyer, both covered walkways and the courtyard. Dimensions are real. Positions are approximate — drag a space to move it where it actually sits.
Picture underneath
A satellite screenshot or the venue's own floor plan. It sits under the grid so you can trace over it. You can also drop a picture straight onto the plan.
Click one end of something you know the length of.
Apply keeps the picture in proportion. If the drawing is only a diagram, use Stretch for its width, then set the scale again and Stretch for its depth.
—
- Set the scale: click the two ends of a wall you measured, type its length.
- Move picture: drag it so it sits where you want, then press Done.
- Stretch your boxes over it.
Mark up the picture
For anything that is not a plain rectangle: a building at an angle, an L-shaped terrace, a lawn. Click each corner in turn, then click the first corner again to finish.
Add a space
Spaces
| Name | Size |
|---|
Nothing selected. Click a box on the plan, or a name above, to edit it.
Measured in real metres along the wall: from the left end of the top and bottom walls, from the top end of the side walls.
Tick this, then stretch the box to fit the picture. The room keeps its real length and width, and the grid and stands inside stay in real metres.
Shown when someone taps the room in the client view.
Tick a space and the grid is drawn only inside the ticked spaces, measured from that room's own corner. Untick them all for a grid everywhere.
A colour makes the outline show on top of the picture. Its name stays off the plan, so add a label where you want one. Drag a corner to move it. Drag a small dot on an edge to add a corner there. Double-click a corner to remove it.
Type | to start a second line.
ColourThe company name and logo sit on the stand and grow and shrink with it as you zoom.
Locked. Tap Locked above the plan to change anything.
Type the real measurements straight in above — that is the accurate way to fix a walkway. Across and Down are where its top left corner sits, read off the numbers along the edges of the plan. Dragging the square handles on the outline works too. Undo, Rotate and Delete are in the bar above the plan. Arrow keys nudge, shift-arrow moves a metre. New stands land inside the selected space.
Add stands
Seating check
Measured against the selected space only.